Mahindra & Mahindra Hiring Process Engineering – Stamping in Chakan, Pune

Mahindra & Mahindra is hiring experienced professionals for Process Engineering – Stamping at Chakan, Pune, Maharashtra. This opportunity is suitable for candidates with 4–8 years of experience in sheet metal stamping, stamping process engineering, die development, process planning, and manufacturing engineering.

The role is particularly relevant for professionals with experience in stamping dies, sheet metal formability, die buy-off, homeline trials, die modification, ECN implementation, and stamping quality troubleshooting.

Candidates with basic knowledge of AutoForm along with experience using AutoCAD, CATIA, Teamcenter, or SAP may find their background relevant to the stated requirements.

Process Engineering – Stamping Job Overview

The selected candidate will be involved in sheet metal stamping process engineering activities, including process planning, die design review, supplier monitoring, die trials, new die development, process troubleshooting, and new product development support.

The position requires practical knowledge of stamping dies and press lines, along with the ability to coordinate with tooling suppliers and internal engineering teams.

Position

Process Engineering – Stamping

Company

Mahindra & Mahindra

Job Location

Chakan, Pune, Maharashtra

Experience

4–8 Years

Educational Qualification

One of the following qualifications is required:

• DME / Diploma in Tool & Die
• BE – Mechanical
• BE – Production

Software / Tools

• AutoCAD
• CATIA
• Teamcenter
• SAP
• Basic AutoForm

Key Responsibilities

Sheet Metal Stamping and Process Engineering

The candidate will work on sheet metal stamping processes and support the development and optimization of manufacturing processes for stamped components.

The role requires an understanding of stamping operations, process sequences, die concepts, press-line requirements, and manufacturing feasibility.

Sheet Metal Parts Simultaneous Engineering

The candidate will participate in simultaneous engineering activities for sheet metal parts.

This may involve working with design, tooling, manufacturing, quality, and other teams to identify manufacturing requirements and potential issues at an early stage of product development.

Stamping Die Process Planning

The position involves stamping die process planning, including reviewing the manufacturing sequence and determining suitable processes for producing sheet metal components.

The candidate should understand operations such as drawing, forming, trimming, piercing, flanging, and other common stamping processes.

Die Design Review and Buy-Off

The engineer will participate in stamping die design reviews and die buy-off activities.

The objective is to verify that the die meets the required design, quality, process, and production requirements before it moves to the next stage.

Static and Dynamic Die Buy-Off

The candidate should understand static and dynamic die buy-off activities.

Static checks can involve dimensional and functional verification of the die, while dynamic trials evaluate die performance under actual or representative press-line operating conditions.

Homeline Trials

The role includes supporting homeline trials after die development.

The engineer may monitor trial results, identify stamping problems, coordinate corrective actions, and verify that the die and process are ready for production requirements.

Die Modification and ECN Implementation

The selected candidate will support die modification activities and implementation of Engineering Change Notices (ECNs).

This requires coordination between engineering, tooling suppliers, production, quality, and other relevant teams to ensure that approved changes are correctly incorporated.

New Die Manufacturing

The engineer will monitor activities related to new stamping die manufacturing.

This can include reviewing supplier progress, following development milestones, monitoring trial schedules, and coordinating technical issues during die development.

Supplier Progress Monitoring

The role requires regular monitoring of tooling supplier progress.

The candidate may track development schedules, review trial status, follow up on pending modifications, and coordinate with suppliers to meet project timelines.

Sheet Metal Formability and AutoForm

Candidates should have knowledge of sheet metal formability and basic AutoForm concepts.

Understanding forming behavior can help engineers identify potential problems such as:

• Wrinkling
• Splitting
• Excessive thinning
• Poor material flow
• Forming instability
• Springback-related issues

Basic AutoForm knowledge can be useful for understanding forming simulation results and supporting process development decisions.

Stamping Quality Troubleshooting

The candidate will support troubleshooting of stamping quality problems.

Common problems may include dimensional variation, wrinkles, splits, surface defects, springback, incorrect trimming, poor flange conditions, and other production issues.

Checking Fixture Concept and Design Review

The position also requires knowledge of checking fixture concepts and design reviews.

The candidate may review fixture concepts to ensure that important part characteristics can be checked accurately and consistently.

Manual and Automated Press Lines

Candidates should have knowledge of both manual and automated press lines.

Understanding material flow, press operations, loading and unloading methods, die changes, automation, and production sequence can be important for this role.

Required Skills

Candidates should ideally have practical experience in:

• Sheet metal stamping
• Stamping process engineering
• Die process planning
• Stamping die design review
• Die buy-off
• Static and dynamic trials
• Homeline trials
• Die modification
• ECN implementation
• New die development
• Supplier progress monitoring
• Sheet metal formability
• Basic AutoForm
• Stamping quality troubleshooting
• Checking fixture concepts
• Manual press lines
• Automated press lines

Experience with AutoCAD, CATIA, Teamcenter, and SAP can also be relevant to the position.

10 Interview Questions and Answers for Process Engineering – Stamping

1. What is stamping process planning?

Answer: Stamping process planning involves deciding how a sheet metal component will be manufactured using suitable stamping operations. It includes determining operations such as drawing, forming, trimming, piercing, and flanging, along with the required sequence and tooling approach.

2. What factors do you consider while developing a stamping process?

Answer: Important factors include material properties, part geometry, draw depth, material flow, forming limits, blank size, number of operations, die concept, press capacity, tonnage, stroke, tooling feasibility, quality requirements, and production volume.

3. What is die buy-off?

Answer: Die buy-off is the process of verifying that a stamping die meets specified requirements before acceptance. It can involve dimensional checks, die functionality, part quality, process capability, trial results, and other agreed technical requirements.

4. What is the difference between static and dynamic die buy-off?

Answer: Static buy-off primarily focuses on checking the die and its components without evaluating full production conditions. Dynamic buy-off evaluates the die during actual or representative press operation to verify performance, part quality, process stability, and production requirements.

5. What is a homeline trial?

Answer: A homeline trial is a trial of the stamping die on the intended or representative production press line. It helps verify die performance, part quality, process sequence, press compatibility, and production readiness under practical manufacturing conditions.

6. What are common sheet metal forming defects?

Answer: Common defects include wrinkling, splitting, excessive thinning, springback, surface defects, dimensional variation, and flange-related problems. The appropriate corrective action depends on the actual root cause and process conditions.

7. How can AutoForm help in stamping process development?

Answer: AutoForm can be used to simulate sheet metal forming and evaluate areas such as material flow, thinning, forming limits, wrinkles, splits, and springback-related behavior. Simulation results can help engineers identify potential process issues before or during physical die development.

8. How would you troubleshoot a stamping split?

Answer: I would first identify where and when the split occurs and analyze the forming condition. I would review material properties, blank size, draw-in, radii, lubrication, binder conditions, process sequence, and local thinning. Simulation results, if available, can also help identify the likely cause before implementing a controlled process or die modification.

9. What is ECN implementation in stamping?

Answer: ECN stands for Engineering Change Notice. In stamping, ECN implementation may involve modifying the die, process, part, or related manufacturing documentation according to an approved engineering change. The modification should be verified through appropriate trials and quality checks.

10. What is the purpose of a checking fixture?

Answer: A checking fixture provides a controlled method for checking important dimensions, profiles, holes, or other characteristics of a stamped component. It helps ensure consistent inspection and can support quality control during development and production.

Frequently Asked Questions (FAQ)

1. What position is Mahindra & Mahindra hiring for?

Mahindra & Mahindra is hiring for Process Engineering – Stamping.

2. Where is the job located?

The position is located in Chakan, Pune, Maharashtra.

3. How much experience is required?

The vacancy requires approximately 4–8 years of experience.

4. What educational qualifications are accepted?

The stated qualifications include DME / Diploma in Tool & Die, BE Mechanical, or BE Production.

5. Is AutoForm experience required?

The vacancy mentions basic AutoForm knowledge. Candidates should understand basic sheet metal forming simulation concepts and how simulation can support stamping process development.

6. Which software tools are mentioned?

The listed tools are AutoCAD, CATIA, Teamcenter, and SAP, along with basic AutoForm knowledge.

7. What are the major responsibilities?

The role includes stamping process planning, simultaneous engineering, die design review and buy-off, static and dynamic trials, homeline trials, die modification, ECN implementation, new die manufacturing, supplier progress monitoring, formability, quality troubleshooting, checking fixtures, and press-line activities.

8. How can candidates apply?

Interested candidates can send their updated CV to sheetal.verma@taggd.com.

Interview Preparation Tips

Candidates preparing for this position should revise both stamping theory and practical die-development experience.

Important topics include:

• Sheet metal forming operations
• Stamping process sequence
• Drawing and forming
• Trimming and piercing
• Flanging
• Blank development
• Binder and addendum concepts
• Die design review
• Static and dynamic die buy-off
• Homeline trials
• Die tryout
• Die modification
• ECN implementation
• Supplier development
• Stamping defects
• Formability
• FLD concepts
• Wrinkling and splitting
• Thinning
• Springback
• Checking fixtures
• Manual and automated press lines
• Basic AutoForm simulation

For AutoForm-related questions, candidates should be prepared to explain how simulation can be used to identify forming problems, material flow issues, thinning, wrinkles, splits, and potential process changes.

Candidates should also prepare real examples from their previous projects involving die trials, supplier coordination, stamping defects, process improvements, or new die development.

How to Apply

Interested and eligible candidates can send their updated resume to:

Email: sheetal.verma@taggd.com

Position: Process Engineering – Stamping

Company: Mahindra & Mahindra

Location: Chakan, Pune, Maharashtra

Experience: 4–8 Years

Qualification: DME / Diploma in Tool & Die / BE Mechanical / BE Production

Candidates should highlight their experience in stamping process engineering, die development, die buy-off, homeline trials, sheet metal formability, AutoForm, CATIA, AutoCAD, Teamcenter, and supplier coordination.

Summary

Mahindra & Mahindra is hiring for Process Engineering – Stamping at Chakan, Pune for professionals with 4–8 years of experience. The position is suitable for candidates with a DME, Diploma in Tool & Die, BE Mechanical, or BE Production background.

The role covers sheet metal stamping process engineering, die process planning, die design review and buy-off, homeline trials, die modification, ECN implementation, new die development, supplier monitoring, formability, stamping quality troubleshooting, checking fixtures, and manual or automated press-line operations.

Candidates with experience using AutoCAD, CATIA, Teamcenter, SAP, and basic AutoForm can highlight these skills in their resumes. Interested candidates can apply by sending their CV to sheetal.verma@taggd.com