JSW MG Motor India is hiring for Supplier Quality Engineer / Sr Engineer at Halol, Vadodara, Gujarat

Mandatory Requirements

– Diploma in Mechanical, Automobile, Production, Manufacturing or equivalent Engineering.
– 4–8 years of experience in Automotive Supplier Quality (SQE).
– Experience in supplier quality management within the automotive industry.
– Candidates with Interior & Exterior automotive parts experience will be preferred.

Preferred Commodity Experience Experience in the following automotive commodities:

– Interior trim components
– Exterior components
– Plastic injection molded parts
– Seating systems
– Interior Lighting
– Glass
– Rubber and sealing components
– Painted and decorative parts
– Other automotive components

Key Responsibilities

– Manage supplier quality for new and existing suppliers.
– Drive quality improvement initiatives with local and international suppliers.
– Investigate supplier quality issues and implement permanent corrective actions.
– Perform RCA using structured problem-solving methodologies.
– Lead supplier CAPA and continuous improvement activities.
– Coordinate with suppliers to improve product and process quality.
– Conduct supplier visits, process audits, and manufacturing assessments.
– Support APQP, PPAP, new product development, & supplier qualification.
– Review engineering changes and ensure timely supplier implementation.
– Manage incoming quality issues, supplier containment, and resolution.

Preferred Technical Skills: Automotive Core Tools, 8D Problem Solving, 5 Why, Fishbone, Process Audits, Supplier Process Validation(NPD), IATF 16949, Lean / Six Sigma

📩 paresh.patel@mgmotor.co.in Subject (Must be exactly): Resume: SQE INT/EXT Engineer/ Sr Engineer

🚨 Important:
– Please ensure all candidates use the above subject line exactly. Applications with an incorrect subject line may be automatically filtered and may not be considered.
– ⁠Apply only the JD and Skills matches your expertise

Interview Questions & Answers

1. What is the role of an SQE?

A Supplier Quality Engineer (SQE) is responsible for ensuring that suppliers consistently deliver components meeting defined quality, technical, and delivery requirements.

The role covers supplier selection support, APQP, PPAP, process audits, supplier development, quality problem resolution, CAPA, and continuous improvement.

An effective SQE should focus not only on detecting supplier defects but also on preventing defects at the supplier’s process.

2. What is APQP and why is it important?

Advanced Product Quality Planning (APQP) is a structured approach used to ensure that quality requirements are incorporated throughout new product development.

It helps identify potential risks early and ensures that product and process requirements are understood before mass production.

For an SQE, APQP is particularly important because supplier risks need to be identified and controlled before SOP.

3. What is PPAP?

Production Part Approval Process (PPAP) provides evidence that the supplier understands the engineering requirements and has a capable production process for consistently producing conforming parts.

Depending on the required submission level, PPAP may include documents such as PSW, Process Flow, PFMEA, Control Plan, MSA studies, dimensional results, material results, capability studies, and sample parts.

4. How would you handle a major supplier quality issue?

My first priority would be containment to prevent defective parts from reaching the production line or customer.

I would then establish the problem using data, perform root-cause analysis, implement corrective and preventive actions, and verify their effectiveness.

For repeated or serious issues, I would also review the supplier’s PFMEA, Control Plan, work instructions, process controls, and error-proofing measures.

5. What is the difference between correction, corrective action, and preventive action?

Correction addresses the immediate problem, such as sorting or replacing defective parts.

Corrective action eliminates the root cause of an existing problem.

Preventive action focuses on preventing potential problems from occurring.

For example, sorting defective components is containment/correction, while installing a poka-yoke to eliminate the cause is a stronger corrective measure.

6. How do you perform an 8D analysis?

I would follow a structured approach:

D1: Establish the team
D2: Define the problem
D3: Implement containment
D4: Identify root cause
D5: Select permanent corrective action
D6: Implement and validate corrective action
D7: Prevent recurrence
D8: Recognize the team and close the issue

The most important part is ensuring that the identified root cause is supported by evidence rather than assumptions.

7. What would you check during a supplier process audit?

I would review the complete manufacturing process, including:

• Process flow
• PFMEA
• Control Plan
• Work instructions
• Process parameters
• Operator skills
• Incoming material controls
• In-process inspection
• Final inspection
• MSA
• SPC
• Traceability
• Poka-yoke
• Maintenance
• Calibration
• Non-conforming material control

I would compare documented controls with what is actually happening on the shop floor.

8. How would you evaluate a supplier for a new component?

I would evaluate the supplier’s technical capability, manufacturing process, capacity, quality system, tooling capability, equipment, manpower, inspection facilities, logistics capability, and previous quality performance.

During development, I would closely monitor APQP milestones, tooling trials, process validation, capability studies, and PPAP submission before approving the supplier for production.

9. What is supplier process validation?

Supplier process validation confirms that the supplier’s manufacturing process can consistently produce components according to engineering requirements.

This includes checking actual production conditions, equipment, tooling, process parameters, inspection methods, cycle time, capacity, quality controls, and process capability.

10. How would you reduce recurring supplier defects?

I would analyze historical defect data and identify the major recurring problems using Pareto analysis.

Then I would conduct a detailed root-cause investigation and review the supplier’s PFMEA and Control Plan.

Where possible, I would implement robust solutions such as poka-yoke, automated inspection, parameter monitoring, process interlocks, standardized work, and operator training rather than depending solely on additional inspection.

Frequently Asked Questions

What experience is required for this SQE position?

The advertised requirement is 4–8 years of automotive Supplier Quality experience.

What qualification is required?

A Diploma in Mechanical, Automobile, Production, Manufacturing, or an equivalent engineering discipline is required.

Which automotive components are preferred?

Experience with interior and exterior components is preferred, including plastics, seating, lighting, glass, rubber, sealing, painted and decorative parts.

Is APQP and PPAP experience important?

Yes. Experience with APQP, PPAP, supplier qualification, NPD, and process validation is highly relevant to this position.

Which problem-solving methods should candidates know?

Candidates should be comfortable with 8D, 5 Why, Fishbone, RCA, CAPA, and structured quality problem-solving.

Is IATF 16949 knowledge required?

Knowledge of IATF 16949 and automotive quality systems is listed among the preferred technical skills.

How to Apply

Interested candidates should send their updated resume to:

📩 paresh.patel@mgmotor.co.in

⚠️ Important Application Instruction

The email subject line must be exactly:

Resume: SQE INT/EXT Engineer/ Sr Engineer

Candidates are advised to apply only if their experience and skills match the job description. Applications with an incorrect subject line may be filtered and may not be considered.

Job Summary

Supplier Quality Engineer / Sr. Engineer | JSW MG Motor India | Halol, Vadodara | 4–8 Years | Automotive SQE

JSW MG Motor India is looking for automotive Supplier Quality professionals with expertise in APQP, PPAP, supplier audits, 8D, RCA, CAPA, IATF 16949, and supplier process validation, preferably with interior/exterior component experience. Apply at paresh.patel@mgmotor.co.in using the exact subject “Resume: SQE INT/EXT Engineer/ Sr Engineer.”