Technico Industries Recruitment Assistant Manager / Deputy Manager – Quality Jobs in Bawal

Technico Industries Limited recruitment 2026 offers an opportunity for experienced quality professionals to apply for Assistant Manager / Deputy Manager positions in the Quality Department at Bawal, Haryana. The opening focuses on Weld Shop and Assembly Quality, with preference given to candidates from the sheet metal automotive industry.

The advertised salary range is ₹8–12 LPA. Professionals with experience in automotive sheet metal components, welding processes, assembly quality, supplier quality, and manufacturing quality systems may find this opportunity relevant.

Technico Industries Job Overview

• Company: Technico Industries Limited
• Job Role: Assistant Manager / Deputy Manager – Quality
• Department: Quality – Weld Shop & Assembly
• Job Location: Bawal, Haryana
• Industry: Automotive / Sheet Metal Manufacturing
• Preferred Experience: Sheet Metal Automotive Industry
• Salary Range: ₹8–12 LPA
• Application Mode: Email
• Recruitment Type: Experienced Professionals

Key Responsibilities of a Quality Manager in Weld Shop & Assembly

The following responsibilities are typical of quality management positions in automotive sheet metal manufacturing. The exact duties for this opening should be confirmed with the employer.

1. Weld Shop Quality Management

Monitor welding operations and ensure that welded components meet specified quality standards, dimensional requirements, and customer expectations.

2. Assembly Quality Control

Oversee quality checks during assembly operations, identify defects, and implement corrective actions to improve process consistency.

3. Sheet Metal Component Inspection

Ensure that sheet metal parts meet drawing specifications, dimensional tolerances, and required fitment conditions before moving to the next production stage.

4. Root Cause Analysis

Investigate recurring defects using problem-solving methods such as 5 Why Analysis, Fishbone Diagrams, and 8D reports. Implement corrective and preventive actions to avoid recurrence.

5. Process Quality Improvement

Monitor manufacturing processes, identify quality risks, and coordinate with production and engineering teams to improve process capability and reduce rejection rates.

6. Customer Quality Management

Support customer complaint resolution, prepare corrective action reports, and ensure timely implementation of agreed quality improvements.

7. Quality Documentation and Audits

Maintain inspection records, process control documents, work instructions, and audit documentation in accordance with applicable quality system requirements.

8. Team Coordination

Guide quality engineers and inspectors, coordinate with production teams, and promote a culture of defect prevention and continuous improvement.

Required Skills and Industry Experience

Candidates applying for Assistant Manager / Deputy Manager – Quality should highlight relevant experience in the following areas:

• Automotive sheet metal component manufacturing
• Weld Shop and Assembly Quality
• Welding defect identification and prevention
• Dimensional inspection and drawing interpretation
• Root Cause Analysis and 8D problem-solving
• Process control and rejection reduction
• Customer complaint handling
• Quality audits and documentation
• Cross-functional coordination with production and engineering

Experience with automotive quality tools such as APQP, PPAP, PFMEA, Control Plans, SPC, and MSA can be beneficial, depending on the role’s requirements.

Salary and Job Location

The advertised compensation for these positions is ₹8–12 lakh per annum (LPA). The final offer may depend on the candidate’s experience, current compensation, technical skills, and interview performance.

The job location is Bawal, Haryana, an important manufacturing location for automotive and industrial suppliers.

How to Apply for Technico Industries Recruitment 2026

Interested candidates can send their updated resumes to the recruitment email addresses provided in the vacancy notice.

Email contacts:

• hrcorp@technicoindustries.com
• hrbp@technicoindustries.com

Suggested Email Subject: Application for Assistant Manager / Deputy Manager – Quality

Candidates should mention their current designation, total experience, automotive sheet metal experience, current CTC, expected CTC, and notice period in their application.

Note: The salary and vacancy details are based on the supplied recruitment notice. The required years of experience, educational qualification, application deadline, and current vacancy status were not specified.

Technico Industries Quality Interview Questions and Answers

1. What are the main responsibilities of a Quality professional in an automotive weld shop?

The main responsibilities include monitoring welding processes, verifying component quality, identifying welding defects, maintaining process controls, conducting inspections, analyzing rejection trends, and implementing corrective actions to meet customer requirements.

2. What are common defects in automotive welding?

Common defects include porosity, incomplete fusion, cracks, spatter, burn-through, undercut, and dimensional distortion. The appropriate corrective action depends on the defect, welding process, material, and process parameters.

3. How do you control quality in an assembly line?

Quality can be controlled through standardized work instructions, process checks, mistake-proofing (Poka-Yoke), fixture verification, dimensional inspection, operator training, and monitoring of defects at each critical production stage.

4. What is PFMEA, and how is it used in sheet metal manufacturing?

Process Failure Mode and Effects Analysis identifies potential process failures, evaluates their risks, and establishes controls to prevent or detect defects. In sheet metal manufacturing, it can address risks such as incorrect dimensions, welding defects, missing components, and assembly misalignment.

5. What is the 8D problem-solving method?

8D is a structured approach to resolving quality problems. It covers team formation, problem definition, containment, root cause identification, corrective action, validation, prevention of recurrence, and recognition of the team.

6. What is the difference between a corrective action and a preventive action?

Corrective action addresses the root cause of an existing problem to prevent recurrence. Preventive action addresses potential causes of failure before the problem occurs. Both require appropriate verification to ensure effectiveness.

7. How would you reduce rejection rates in a weld shop?

I would analyze rejection data, classify defects, identify high-frequency and high-impact problems, verify welding parameters and fixture conditions, review operator practices, and implement targeted corrective actions. I would then monitor rejection trends to confirm sustained improvement.

8. What is PPAP in the automotive industry?

Production Part Approval Process (PPAP) provides evidence that a supplier understands customer requirements and can consistently manufacture parts meeting the specified requirements under production conditions.

9. How do you handle a customer quality complaint?

I would immediately contain the suspected defective material, assess the scope of the issue, communicate with the customer, investigate the root cause, implement corrective actions, and validate their effectiveness. I would document the findings and take steps to prevent recurrence.

10. Which quality KPIs are important in automotive manufacturing?

Common KPIs include rejection rate, PPM defects, customer complaints, first-pass yield, rework percentage, scrap cost, process capability, audit findings, and corrective action closure time.

Frequently Asked Questions (FAQs)

1. Which positions are available at Technico Industries?

The recruitment notice lists Assistant Manager and Deputy Manager positions in the Quality Department.

2. Where is the job located?

The advertised location is Bawal, Haryana.

3. What is the salary offered?

The stated salary range is ₹8–12 LPA, subject to the employer’s selection and compensation process.

4. Which industry experience is preferred?

Experience in the automotive sheet metal industry is preferred, particularly for Weld Shop and Assembly Quality functions.

5. What educational qualification is required?

The supplied notice does not specify the educational qualification. Candidates should confirm the requirement with the recruitment team.

6. How can candidates apply?

Send your updated resume to hrcorp@technicoindustries.com or hrbp@technicoindustries.com with the subject line “Application for Assistant Manager / Deputy Manager – Quality.”

Interview Preparation Tips

• Revise common welding defects, their causes, and corrective actions.
• Prepare examples of rejection reduction and process improvement.
• Review PFMEA, Control Plans, APQP, PPAP, SPC, and MSA.
• Practice explaining 8D and root cause analysis using actual work examples.
• Understand dimensional inspection, welding fixtures, and assembly quality controls.
• Be ready to discuss customer complaints, audits, and quality team management.

Summary

Technico Industries Limited is advertising Assistant Manager / Deputy Manager positions in Quality – Weld Shop & Assembly at Bawal, Haryana. The advertised salary range is ₹8–12 LPA, with preference for candidates from the automotive sheet metal industry.

Job Profile: Assistant Manager / Deputy Manager – Quality
Company: Technico Industries Limited
Location: Bawal, Haryana
Department: Quality – Weld Shop & Assembly
Salary: ₹8–12 LPA
Industry Preference: Automotive Sheet Metal
Apply Email: hrcorp@technicoindustries.com / hrbp@technicoindustries.com