Tata Technologies Hiring – Deputy Engineer – Stamping Die Design | Chennai

Tata Technologies is hiring experienced engineering professionals for the position of Deputy Engineer – Stamping Die Design at its Chennai location. This opportunity is suitable for Mechanical Engineering graduates and Diploma holders in Tool & Die Making with 3–5 years of experience in automotive sheet metal stamping die design and detailing.

Candidates with hands-on experience in designing and detailing stamping dies for tandem, transfer and progressive press lines are encouraged to apply. Applicants should have strong knowledge of automotive BIW components, die operations, CAM design, GD&T, die materials and standard tooling components.

This role offers an opportunity to work on large automotive sheet metal components and complex stamping die development projects.

Job Overview – Tata Technologies Recruitment

• Company Name: Tata Technologies
• Job Position: Deputy Engineer – Stamping Die Design
• Department: Automotive Engineering / Tool Design
• Job Location: Chennai, Tamil Nadu
• Experience Required: 3–5 Years
• Qualification: B.E. Mechanical Engineering or Diploma in Tool & Die Making
• Industry: Automotive / Engineering Services
• Specialisation: Sheet Metal Stamping Die Design

Key Responsibilities – Stamping Die Design

1. Sheet Metal Stamping Die Design and Detailing

• Design and detail sheet metal stamping dies for automotive components.
• Develop die designs for tandem, transfer and progressive press lines.
• Work on different stamping operations, including blank, draw, trim, restrike and flange dies.
• Develop tooling solutions for large automotive BIW and structural components.
• Ensure die designs meet customer requirements and manufacturing standards.

2. Automotive BIW Component Die Development

Candidates should have experience or familiarity with stamping die design for large automotive panels and structural components, including:

• Long Member Front.
• Rear Floor Center.
• Wheel House Outer.
• Panel Rear Outer.

Understanding component geometry, forming requirements, material flow and manufacturing feasibility is important for these applications.

3. CAM Design and Standard Die Components

• Perform CAM design activities for stamping die development.
• Work with standard die components using catalogues from Misumi, Dayton and Sankyo.
• Select suitable standard components based on die design requirements.
• Ensure proper integration of standard components into die assemblies.
• Follow applicable tooling design standards and customer specifications.

4. Die Materials and Engineering Calculations

• Understand different die materials and their applications.
• Apply knowledge of castability standards in die design.
• Perform die design calculations according to customer requirements.
• Ensure structural strength, functionality and manufacturability of tooling designs.
• Select appropriate materials for different die components and applications.

5. Press Line and Panel Transfer Mechanisms

• Understand panel transfer systems used in automotive stamping lines.
• Work with robot-based panel transfer mechanisms.
• Understand crossbar and feed-bar transfer systems.
• Consider press line requirements during die design and operation planning.
• Ensure proper component transfer and accessibility between stamping operations.

6. 3D Modelling, Drawings and GD&T

• Develop solid and surface models for stamping die components.
• Prepare detailed part drawings and die assembly drawings.
• Interpret customer component drawings and engineering specifications.
• Apply GD&T principles during tooling design and detailing.
• Understand stamping operation sequences and their impact on die development.

Technical Skills Required

Candidates applying for this position should possess knowledge and experience in:

• Sheet metal stamping die design and detailing.
• Tandem, transfer and progressive press lines.
• Blank, draw, trim, restrike and flange operations.
• CAM design.
• Automotive BIW and large panel tooling.
• Solid and surface modelling.
• Detail drawings and assembly drawings.
• GD&T and engineering drawing interpretation.
• Die materials and castability standards.
• Standard die components – Misumi, Dayton and Sankyo.
• Robot, crossbar and feed-bar transfer mechanisms.
• Die design calculations and operation sequencing.

Educational Qualification and Experience

Qualification:

• B.E. in Mechanical Engineering with sheet metal knowledge, or
• Diploma in Tool & Die Making.

Experience Required: 3–5 Years.

Candidates should have practical experience in automotive stamping die design, detailing and CAM activities. Experience in large automotive BIW and structural panel development will be an advantage.

How to Apply for Tata Technologies Recruitment 2026?

Interested and eligible candidates can share their updated resumes through the following recruitment email addresses.

Apply Through Email:

• To: balaji.k@tatatechnologies.com
• CC: Manikandan.V1@tatatechnologies.com

Required Email Subject Line:

Post Applied for Stamping Die Design _ Deputy Engineer

Candidates should mention their total experience, current location, current CTC, expected CTC and relevant stamping die design project experience in their application.

10 Interview Questions and Answers – Stamping Die Design

Q1. What are the major types of stamping dies used in automotive manufacturing?

Answer: The major types include blanking dies, drawing dies, trimming dies, piercing dies, restrike dies, flanging dies and progressive dies. Tandem and transfer die systems are also widely used for manufacturing automotive BIW components and large sheet metal panels.

Q2. What is the difference between tandem, transfer and progressive dies?

Answer:

• Tandem Dies: Individual dies are installed in separate presses or stations, and components are transferred between operations.
• Transfer Dies: A transfer mechanism moves the component from one die station to another within the press line.
• Progressive Dies: A continuous strip moves through multiple stations, with each station performing a specific operation until the finished component is produced.

Q3. What is the difference between blanking and drawing operations?

Answer: Blanking is a cutting operation in which a required flat component profile is cut from sheet metal. Drawing is a forming operation in which a flat blank is transformed into a three-dimensional shape using a punch, die and binder.

Q4. What is a restrike operation in stamping die design?

Answer: A restrike operation is used to improve component dimensional accuracy and correct shape variations after the initial forming operation. It helps achieve the required geometry, profile and dimensional consistency.

Q5. What factors should be considered while designing a draw die for large automotive panels?

Answer: Important factors include component geometry, material properties, sheet thickness, draw depth, blank shape, binder pressure, addendum design, draw beads, material flow, thinning, wrinkling, splitting and springback.

Q6. What is the importance of CAM design in stamping die development?

Answer: CAM (Computer-Aided Manufacturing) design supports the preparation of manufacturing data and machining strategies for die components. It helps improve machining accuracy, manufacturing efficiency and the quality of complex die surfaces.

Q7. What is GD&T, and why is it important in stamping die design?

Answer: GD&T stands for Geometric Dimensioning and Tolerancing. It defines allowable variations in component geometry, including position, profile, flatness, perpendicularity and other geometric characteristics. It ensures dimensional consistency and proper assembly of automotive components.

Q8. What are the important considerations when selecting die materials?

Answer: Die material selection depends on application, strength, hardness, wear resistance, toughness, machinability, heat treatment requirements and production volume. Castability and material standards are also important when designing large die structures.

Q9. What is the difference between robot transfer, crossbar transfer and feed-bar transfer systems?

Answer: Robot transfer uses industrial robots to move components between press stations. Crossbar transfer uses mechanical crossbars to transfer panels through the press line, while feed-bar systems use dedicated transfer bars and gripping mechanisms to move components between operations.

Q10. What are the common problems encountered during automotive stamping die tryout?

Answer: Common problems include wrinkling, splitting, excessive thinning, springback, dimensional variation, surface defects, poor trimming quality and panel transfer issues. These problems can be addressed through die modifications, binder and draw bead adjustments, process optimisation and design corrections.

Frequently Asked Questions (FAQ)

1. Which company is hiring for Deputy Engineer – Stamping Die Design?

Tata Technologies is hiring for this position.

2. Where is the job location?

The job location is Chennai, Tamil Nadu.

3. How much experience is required?

Candidates should have 3–5 years of relevant experience in stamping die design and detailing.

4. What is the required educational qualification?

B.E. Mechanical Engineering with sheet metal knowledge or Diploma in Tool & Die Making.

5. Which stamping die operations should candidates know?

Candidates should have knowledge of blank, draw, trim, restrike and flange die operations.

6. Is CAM design experience required?

Yes. Strong CAM design experience is specifically mentioned among the key requirements.

7. Which automotive components are preferred?

Experience in Long Member Front, Rear Floor Center, Wheel House Outer and Panel Rear Outer is preferred.

8. How can candidates apply for this job?

Interested candidates can email their resumes to balaji.k@tatatechnologies.com, keeping Manikandan.V1@tatatechnologies.com in CC.

Final Summary

Tata Technologies is hiring Deputy Engineers for Stamping Die Design in Chennai. Mechanical Engineering graduates and Tool & Die Diploma holders with 3–5 years of experience in automotive sheet metal die design, CAM, tandem, transfer and progressive press tooling are encouraged to apply.

Job Profile: Deputy Engineer – Stamping Die Design
Company Name: Tata Technologies
Location: Chennai, Tamil Nadu
Experience: 3–5 Years
Qualification: B.E. Mechanical / Diploma in Tool & Die Making
Key Skills: Stamping Die Design, CAM, BIW Tooling, GD&T
Apply Email: balaji.k@tatatechnologies.com
CC: Manikandan.V1@tatatechnologies.com
Email Subject: Post Applied for Stamping Die Design _ Deputy Engineer