Auto Ignition Ltd. (Autolek) hiring NPD Quality Engineer Job in Prithla

Auto Ignition Ltd. (Autolek) is hiring an NPD Quality Engineer at Prithla, Haryana. This opportunity is suitable for automotive quality professionals with a B.Tech qualification and a minimum of four years of experience in New Product Development (NPD) Quality.

The company is looking for candidates with practical knowledge of APQP, PPAP, PFMEA, Control Plans, Core Quality Tools, product validation, and customer-specific requirements. Professionals experienced in automotive quality planning, process readiness, and regulatory compliance can apply for this position.

Auto Ignition Ltd. Recruitment 2026 – Job Overview

• Company Name: Auto Ignition Ltd. (Autolek)
• Job Position: NPD Quality Engineer
• Job Location: Prithla, Haryana
• Industry: Automotive
• Qualification: B.Tech
• Experience Required: Minimum 4 years
• Department: New Product Development Quality
• Application Mode: Email
• Apply Email: hrd@autolek.com

Key Skills Required for NPD Quality Engineer

1. APQP and PPAP Documentation

Experience in Advanced Product Quality Planning (APQP) and Production Part Approval Process (PPAP) is important for planning and validating new automotive products before production approval.

2. PFMEA and Control Plan

Candidates should understand Process Failure Mode and Effects Analysis (PFMEA), Control Plans, and the application of Core Quality Tools to identify risks and establish effective process controls.

3. Prototype, Trial and Product Validation

The role requires monitoring prototype builds, production trials, and product validation activities to ensure that new products meet specified quality requirements.

4. Process Readiness and NPD Audits

Professionals should be familiar with process readiness assessments, NPD audits, quality gates, and milestone tracking during new product introduction.

5. Customer Requirements and CSR Compliance

Candidates should understand customer-specific requirements (CSR) and ensure that applicable customer quality standards are incorporated into NPD activities.

6. Process Capability, MSA and SPC

Knowledge of Process Capability Analysis, Measurement System Analysis (MSA), and Statistical Process Control (SPC) is required to evaluate process performance and maintain consistent product quality.

7. IMDS and Environmental Compliance

Experience with the International Material Data System (IMDS) and applicable RoHS and REACH requirements is relevant to automotive material reporting and regulatory compliance.

Key Responsibilities of NPD Quality Engineer

1. APQP and PPAP Management

Prepare, review, and maintain APQP and PPAP documentation to support new product development and customer approval requirements.

2. Prototype and Product Validation

Monitor prototype builds, production trials, testing, and validation activities to identify quality concerns before production launch.

3. Process Readiness

Ensure manufacturing processes are prepared for new product launches and that NPD milestones and quality requirements are completed on schedule.

4. Root Cause Analysis and Corrective Actions

Drive resolution of NPD-related quality issues through root cause analysis (RCA), corrective actions, and effectiveness verification.

5. Quality Gate Monitoring

Monitor quality gates and ensure that product and process requirements are met at each stage of new product development.

6. Customer Compliance

Coordinate with relevant departments to ensure customer-specific requirements are addressed and documented throughout the NPD process.

7. IMDS and Regulatory Documentation

Manage IMDS submissions and support compliance with applicable environmental and material regulations, including RoHS and REACH requirements.

Eligibility Criteria

Candidates interested in the Auto Ignition Ltd. NPD Quality Engineer vacancy should meet the following requirements:

• B.Tech qualification.
• Minimum four years of relevant professional experience.
• Automotive industry experience.
• Knowledge of APQP, PPAP, PFMEA, Control Plans, and Core Quality Tools.
• Experience with prototype builds, product trials, validation, and process readiness.
• Understanding of customer-specific requirements and quality audits.
• Familiarity with MSA, SPC, process capability, IMDS, RoHS, and REACH.

Preferred Certifications

The following certifications are preferred for this position:

• IATF 16949 Internal Auditor: Knowledge of automotive quality management system requirements and internal auditing.
• APQP and PPAP: Training in product quality planning and production part approval.
• FMEA: Training in failure mode and effects analysis.
• MSA: Training in measurement system analysis.
• SPC: Training in statistical process control.

These certifications can help demonstrate a candidate’s familiarity with automotive quality planning and process control practices.

How to Apply for Auto Ignition Ltd. Jobs?

Interested and eligible candidates can send their updated CV to the recruitment email address below.

Email: hrd@autolek.com

Suggested email subject: Application for NPD Quality Engineer – Prithla

Candidates should highlight their automotive experience, NPD projects, APQP/PPAP documentation experience, Core Quality Tools knowledge, product validation activities, and relevant certifications in their resumes.

Interview Preparation: 10 NPD Quality Engineer Questions and Answers

1. What is APQP in automotive manufacturing?

Advanced Product Quality Planning (APQP) is a structured approach used to plan and control product quality throughout development and launch. It helps ensure that customer requirements, product design, manufacturing processes, validation, and quality controls are addressed before production begins.

2. What is the difference between APQP and PPAP?

APQP is the overall planning process for developing and launching a product. PPAP is the formal approval process used to demonstrate that the production process can consistently manufacture parts meeting customer requirements.

3. What is PFMEA, and why is it important?

Process Failure Mode and Effects Analysis identifies potential process failures, their effects, and their causes. It helps teams assess risks, prioritize improvement actions, and establish preventive controls before failures occur.

4. What is the purpose of a Control Plan?

A Control Plan defines the characteristics to be controlled, the measurement methods, inspection frequency, acceptance criteria, and reaction plan when a process goes out of specification. It supports consistent manufacturing quality.

5. What activities are included in NPD quality planning?

NPD quality planning typically includes reviewing customer requirements, preparing APQP documentation, developing PFMEA and Control Plans, planning validation, monitoring prototype and trial builds, completing required quality gates, and preparing PPAP submissions.

6. How do you manage quality issues during a prototype or production trial?

I would document the issue, contain affected parts, assess the risk, and coordinate with Design, Production, and Process Engineering to identify the root cause. Corrective actions would then be implemented and verified before proceeding to the next approval stage.

7. What is the difference between MSA and SPC?

Measurement System Analysis evaluates whether a measurement system is suitable and reliable for its intended use. Statistical Process Control uses statistical methods, such as control charts, to monitor process stability and identify unusual variation.

8. What is process capability?

Process capability measures how well a stable process can meet specified tolerance limits. Common indices include Cp and Cpk. Capability results should be interpreted alongside process stability, data quality, and applicable customer acceptance criteria.

9. What is IMDS, and why is it used in the automotive industry?

The International Material Data System (IMDS) is used to report material composition information for automotive components. It supports material transparency and helps manufacturers and suppliers address applicable customer and regulatory requirements.

10. What is the role of an IATF 16949 Internal Auditor?

An internal auditor evaluates whether the quality management system conforms to applicable requirements and is effectively implemented. The auditor reviews documented processes, checks objective evidence, records nonconformities, and supports corrective-action follow-up.

Frequently Asked Questions (FAQs)

1. Which company is hiring for the NPD Quality Engineer position?

Auto Ignition Ltd. (Autolek) has announced the vacancy.

2. Where is the job located?

The position is based in Prithla, Haryana.

3. What qualification is required?

A B.Tech qualification is specified in the vacancy announcement.

4. How much experience is required?

Candidates must have a minimum of four years of experience.

5. Which technical skills are important for this role?

APQP, PPAP, PFMEA, Control Plans, Core Quality Tools, product validation, MSA, SPC, process capability, and customer-specific requirements are important skills for the advertised position.

6. Are certifications mandatory?

The announcement lists IATF 16949 Internal Auditor and Core Tools certifications as preferred, rather than explicitly mandatory.

7. How can candidates apply?

Send an updated CV to hrd@autolek.com.

8. Has the salary been announced?

The supplied vacancy details do not specify salary or CTC information. Candidates can confirm compensation during the recruitment process.

Summary

Auto Ignition Ltd. (Autolek) is hiring an NPD Quality Engineer at Prithla, Haryana. The position requires a B.Tech qualification and a minimum of four years of automotive experience, with a focus on APQP, PPAP, PFMEA, product validation, process readiness, customer compliance, and regulatory documentation.

Job Profile: NPD Quality Engineer
Company: Auto Ignition Ltd. (Autolek)
Location: Prithla, Haryana
Qualification: B.Tech
Experience: Minimum 4 Years
Industry: Automotive
Apply Email: hrd@autolek.com