VTK Industries Pvt. Ltd.

VTK Industries Pvt. Ltd. is hiring for multiple positions ( Freshers to Managers level ) in Plastic Injection Moulding at Irungattukottai, Sriperumbudur, Tamil Nadu.

🏭 Industry: Automotive Injection / Plastic Components Manufacturing

⭐ Candidate Requirements
* Plastic Injection Moulding experience is mandatory for experienced positions
* Automotive / Plastic Component Manufacturing experience preferred

📩 hrmanager@vtkindustries.com
📱 Contact: 8925942616 ( WhatsApp )

Key Job Roles at VTK Industries

QA Manager

The QA Manager will be responsible for managing quality activities associated with plastic injection moulding and automotive plastic components. The role requires practical experience in injection moulding quality, defect analysis, process control and quality improvement.

Candidates should be comfortable coordinating with Production, NPD and other departments to maintain consistent product quality.

Production Manager

The Production Manager will oversee injection moulding production activities and ensure that production targets are achieved while maintaining quality and safety standards.

Experience in plastic injection moulding operations, manpower management, machine utilization, rejection reduction and production planning will be valuable for this position.

NPD Assistant Manager

The NPD Assistant Manager will support new product development activities related to plastic injection moulded components.

The position requires experience in injection moulding and the ability to coordinate with design, tooling, quality and production teams during product development and launch activities.

NPD Assistant

VTK Industries is also hiring NPD Assistants, with two positions available. Freshers and candidates with 0–2 years of experience can apply.

This opportunity can suit Diploma or B.E. candidates who want to begin their career in automotive plastic component development.

QA Senior Engineer

The QA Senior Engineer will handle quality-related activities for plastic injection moulded products. Candidates should have practical experience in identifying moulding defects, monitoring process quality and implementing corrective actions.

Experience in automotive plastic component manufacturing will be an advantage.

Production Engineer

The Production Engineer will support day-to-day injection moulding production and help maintain output, quality and process efficiency.

Candidates should understand injection moulding processes, machine operation, production monitoring and basic troubleshooting.

Production Mould Setter

The Mould Setter role is focused on mould changeover and injection moulding machine setup. Candidates should have practical knowledge of mould setting, machine parameters and process stabilization.

Dispatch In-Charge

VTK Industries is hiring two Dispatch In-Charge positions. Candidates with relevant dispatch, logistics or material handling experience can apply.

The role will involve coordinating finished-goods dispatch and ensuring that materials are dispatched accurately and on time.

Maintenance – Fresher

Freshers with a Diploma or B.E. can apply for the Maintenance position. This is an opportunity for candidates interested in developing a career in industrial maintenance within an automotive manufacturing environment.

Candidate Requirements

For experienced positions, plastic injection moulding experience is mandatory. Candidates from automotive plastic component manufacturing will have an advantage.

Relevant technical knowledge may include:

Injection moulding processes
Mould setting and changeover
Machine parameter setting
Plastic component defects
Process troubleshooting
Production monitoring
Quality inspection
Rejection analysis
New product development
Automotive component manufacturing

For fresher positions, candidates should have a relevant Diploma or B.E. qualification and a willingness to learn manufacturing processes.

Interview Questions and Answers

1. What are the major parameters in injection moulding?

Answer: Important parameters include injection pressure, injection speed, melt temperature, mould temperature, holding pressure, holding time, cooling time and screw speed. These parameters must be optimized according to the material, mould design and component requirements.

2. What are common defects in plastic injection moulding?

Answer: Common defects include short shot, sink marks, flash, warpage, weld lines, burn marks, flow marks, black spots and dimensional variation. The correct solution depends on whether the root cause is related to material, machine parameters, mould condition or process settings.

3. How would you reduce rejection in an injection moulding process?

Answer: I would first categorize rejection by defect type and machine, mould, material and shift. After identifying the major defect, I would perform root-cause analysis using tools such as 5 Why, Fishbone and Pareto analysis. Corrective actions should then be implemented and monitored to confirm that the defect has been permanently reduced.

4. What is the purpose of holding pressure?

Answer: Holding or packing pressure helps compensate for material shrinkage after the cavity is filled. Correct holding pressure and time help achieve proper dimensional stability and reduce defects such as sink marks and internal voids.

5. What is mould changeover?

Answer: Mould changeover involves removing one mould and installing another on the injection moulding machine. It includes mould mounting, alignment, connection of cooling and other utilities, parameter setting, trial shots and process approval. A well-controlled changeover reduces machine downtime.

6. How do you handle a sudden increase in rejection?

Answer: I would immediately contain the affected production and identify when the rejection started. I would compare machine parameters, material batch, mould condition, operator, shift and inspection results with the previous good production. After identifying the probable root cause, I would implement corrective action and verify the results before restarting normal production.

7. What is the role of NPD in plastic component manufacturing?

Answer: NPD ensures that a new plastic component can be manufactured consistently according to design and quality requirements. It involves coordination between design, tooling, production, quality and suppliers, followed by trials, process validation and necessary documentation before mass production.

8. What is the difference between QA and QC?

Answer: Quality Assurance is process-oriented, focusing on systems and processes that prevent defects. Quality Control is product-oriented, focusing on inspection, testing and identification of defects. Both functions work together to achieve consistent product quality.

9. What should a mould setter check before starting production?

Answer: The mould setter should verify mould mounting, alignment, clamping, cooling connections, hydraulic or pneumatic connections where applicable, material condition, machine settings and safety interlocks. Initial trial components should be inspected before releasing the process for regular production.

10. How can injection moulding productivity be improved?

Answer: Productivity can be improved through cycle-time optimization, reducing mould changeover time, minimizing machine downtime, improving mould maintenance, optimizing manpower and reducing rejection. OEE analysis can help identify whether the major loss comes from availability, performance or quality.

Frequently Asked Questions

Is plastic injection moulding experience mandatory?

Yes, experienced candidates applying for the relevant QA, Production and NPD positions should have plastic injection moulding experience.

Are freshers eligible?

Yes. Freshers can apply for NPD Assistant and Maintenance – Fresher opportunities where the requirements allow fresh graduates.

What qualification is required?

The listed positions are open to candidates with a Diploma or B.E.

Where are these jobs located?

The positions are based at Irungattukottai, Sriperumbudur, Tamil Nadu.

Is automotive industry experience preferred?

Yes. Automotive and plastic component manufacturing experience is preferred, particularly for experienced positions.

How can candidates apply?

Candidates can send their updated resume to hrmanager@vtkindustries.com. For queries or applications, the listed WhatsApp contact is 8925942616.

Tips to Prepare for the Interview

Candidates applying for experienced injection moulding positions should revise machine parameters, mould setting, injection moulding defects, cycle-time optimization, process troubleshooting and quality control.

For QA roles, prepare examples involving rejection reduction, RCA, CAPA, 7 QC Tools and customer quality issues.

For Production roles, focus on OEE, productivity, manpower management, downtime, cycle time and production targets.

For NPD positions, revise new mould trials, product development, process validation and cross-functional coordination.

Freshers should focus on basic concepts of plastic materials, injection moulding machines, mould components, safety and manufacturing processes.

How to Apply

Interested candidates can share their updated CV at:

📩 hrmanager@vtkindustries.com
📱 WhatsApp: 8925942616

Location: Irungattukottai, Sriperumbudur, Tamil Nadu
Industry: Automotive Injection / Plastic Components Manufacturing

Job Summary

VTK Industries Pvt. Ltd. is hiring for QA, Production, NPD, Dispatch and Maintenance positions from fresher to manager level in plastic injection moulding at Irungattukottai, Sriperumbudur.
Apply: hrmanager@vtkindustries.com | WhatsApp: 8925942616 | Diploma/B.E. candidates can apply

To apply for this job email your details to hrmanager@vtkindustries.com